Service Hotline: +86-755-23778007
You are here:Home >> Products >> Dispensing mach...

Products

Products

follow Us

Mail sales@sztensan.com
Contact: Mark Chang
Wecha/whatsappt:13688843969 
Tel:86-755-23778007
Office Address:longhua district  Shenzhen   
Factory Address:A28 Tangjia road  Guangming new district  shenzhen 

Dispensing machine

Automatic Screw Feeder with telescope screwdriver set

Automatic Screw Feeding Machine

  • TENSAN Automatic Screw Feeder, TS-30, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduce noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw before you move to the next fasten position. No need to pick screw, no need to put screw into drive bit and prevent rust due to hand sweating. 
    Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw. 
    For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.
    Nickname
    Automatic Screw Feeding MachineFeatures
    1. Remarkable Operation Efficiency Improvement
    Just like an ordinary screwdriver, the automatic screw is operated with only one hand, and achieves an operating speed of 20-30 screws per minute. It saves you the effort of picking up, moving and positioning the screws.
    2. Easy-to-use Compact Construction
    By adopting the highly reliable Blade Hopper design, it is a handy and dependable device, a product of years of continuous improvement.
    3. The highly reliable supply type 
    By our company manufacture the unique Shoot rail, supply the kinds of screws.
    4. Reinforced Screw Locking Quality
    The Pneumatic / Electric torque-controlled screwdriver of the famous brand in Japan is used. Furthermore, the applicable pneumatic/Electric torque screwdriver will be used according to the customer‘s work piece locking torque requirements to achieve consistent fastening quality.
    5. Customization and Stability
    The stability of screw conveyance and the locking will be remarkably enhanced for the custom-made screws. The SEALS Automatic Screw Feed System is customized for your fasteners and specific application.
    Specification

    • Voltage: 220V, Single Phase
    • Air Pressure: 5.5 kg / cm² / 85PSI
    • L / W / H: 35 / 25 / 38 cm
    • Net Weight / Gross Weight: 23 kg / 31 kg
    • Capacity: 30 pcs/min.
    • Torque: Refer to screwdriver capacity
    • Volumn: M3 x 15 2000 pcs
    • Driver Option : Sumake, Uryu, M&L (Air Screwdriver) or Sumake, Kilews Electric, Delvo (Electric Screwdriver) 
  • Please fill out the information, we will reply as soon as possible

    *

    *

    *

    *

Contact us