Service Hotline: +86-755-23778007
You are here:Home >> Products >> RESIN

Products

Products

follow Us

Mail sales@sztensan.com
Contact: Mark Chang
Wecha/whatsappt:13688843969 
Tel:86-755-23778007
Office Address:longhua district  Shenzhen   
Factory Address:A28 Tangjia road  Guangming new district  shenzhen 

RESIN

Epoxy Adhesive TS2111

TS2111 is a fast curing two-component epoxy adhesive, which is easy to operate, can achieve rapid curing at room temperature. It has high strength, good toughness after curing. It can well bond to metal, ceramics, glass plastic and other commonly used materials.

  • Introduction

    TS2111 is a fast curing two-component epoxy adhesive, which is easy to operate, can achieve rapid curing at room temperature. It has high strength, good toughness after curing. It can well bond to metal, ceramics, glass plastic and other commonly used materials.

    Features and Advantages

    l   High mechanical properties, strong cohesion, dense chemical structure

    l   Small shrinkage of curing volume, small linear expansion coefficient            

    l   Good stability, no deterioration

    l   Good process, easy to use, can be simultaneously extrude the mix to use

    l   No low molecular release

    l   Curing fast at room temperature, can improve production efficiency

    l   Good toughness, good adhesion

    l   Non-corrosive, no damage to the substrate

    Typical Applications

    Special used to bond LED

    Technical Parameters

    Feature before curing:

    Item

    Index

    TS2111

    TS2111

    Exterior

    Colorless to pale yellow transparent viscous liquid

    Light (brown) yellow transparent viscous liquid

    solid content  %

    100

    100

    flash point

    100

    100

    viscosity25℃mPa.s

    1000020000

    1000020000

    Proportion 25℃g/cm3

    1.16±0.02

    1.03±0.02

    Ratio (weight or volume ratio)

    AB = 11

    Positioning timemin

    10~2025℃

    The physical properties and electrical insulation after curing

    Items

    Index

    Exterior

    Light yellow transparent material

    Proportion25℃g/cm3

    1.11±0.02

    Thermal expansion coefficient /℃

    65×10-6

    Glass transition temperature ℃

    75

    HardnessShore D

    80

    Adhesion Strength  Mpa

    10.5

    Temperature resistance ℃

    - 40 100

    Dielectric constant25℃1KHz

    4.3

    Volume resistance Ω-cm

    3.5×1013

    Surface resistance Ω-cm

    3×1014

    Dielectric loss25℃1KHz

    0.015

    Dielectric strength25℃ kV/mm

    15

     

  • Please fill out the information, we will reply as soon as possible

    *

    *

    *

    *

Contact us